Apollo SL Instalační manuál stáhnout pdf (Strana 39)

Specifications

Apollo SL50 / SL60 Installation Manual

Position update interval............................ 1 second typical

Datum ....................................................... WGS-84

AVIONICS OUTPUTS

CDI L/R deviation .................................... ±150 mv full scale, will drive up to 200 ohm load

TO/OFF/FROM flag................................. ±250 mv, TO/FROM indication, will drive up to

200 ohm load

Nav valid flag ........................................... +300 mv for valid indication, will drive up to 100

ohm load

Nav superflag ........................................... Vin - 2 volts minimum for valid, source capability

of 400 mA

Annunciators ............................................ Open collector outputs capable of sinking up to

400 mA for turning ON annunciator lamps

· MSG (message) ON indicates message(s) active

· PTK (parallel track) ON indicates parallel track

is enabled

· OBS/HLD (waypoint sequencing hold) ON

indicates waypoint sequencing is on hold

ANNUNCIATOR REQUIREMENTS

The SL50 and SL60 installed for IFR operation require the following annunciators. Each

annunciator should include a lamp of the proper voltage for the installation.

Legend Color

MSG amber

PTK blue or white

OBS/HLD blue or white optional, to indicate waypoint sequencing hold, can be

combined with a momentary “

WPT SEQ” hold select push

button

The annunciators should be connected to a suitable dimming circuit for night time operation.

Example Annunciators

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 61 62

Žádné komentáře

Apollo SL Instalační manuál Strana 39